Silvercrest SLB 20 A1 Bedienungsanleitung Seite 77

NOTE
► Using the NFC function to establish a
Bluetooth
under the following conditions:
–
–
♦ Make sure that the speaker is switched
on.
♦ Turn on the NFC function on the exter-
nal playback device. You can find a
detailed description of how to do this
in the operating instructions for your
external playback device.
♦ Hold the external playback device less
than 1 cm from the NFC logo on the
top of the speaker.
Alternatively, you can lay the external
playback device directly onto the
NFC logo on the top of the speaker.
♦ Confirm the connection once the
corresponding message appears on the
display of the external playback device.
│
■ 74
®
The external playback device is
less than 1 cm from the NFC logo
on the top of the speaker.
The speaker is not connected to
another external playback device
via Bluetooth
GB │ MT
connection only works
.
®
SLB 20 A1