ECTIVE CSI Serie Montage- Und Betriebsanleitung Seite 64

Additional possible errors of inverter with integrated charger
Symptom
charger does not work
charger only supplies low
current
charging does not function
despite shore power
connection
⚠
Caution!
Immediately eliminate error sources!
Make sure that error sources are eliminated . Multiple restarts due to unsolved errors
can destroy the inverter .
Especially prevent short circuits and polarity reversals because they can destroy the
device despite protection .
62
[
ECTIVE SINUS/SINE INVERTER – CSI-/SSI-SERIES
®
Possible reason
parameters of input
voltage are outside of
tolerance
low input voltage
one or several batteries
are not connected / defect
1 . one or several batteries
defect
2 . battery fuse defect
3 . battery cable defect or
damaged
4 . charger defect
Solution
check voltage and frequen-
cy of input source
use the right AC voltage
check all connections
1 . check battery,
change if necessary
2 . check fuse,
change if necessary
3 . check cable,
change if necessary
4 . contact producer/dealer
]