ECTIVE CSI Serie Montage- Und Betriebsanleitung Seite 45

[
ECTIVE SINUS/SINE INVERTER – CSI-/SSI-SERIES
®
Front view: Illustration 7
Multi-function remote control K01
(available for the CSI50/100-series)
K01 REMOTE CONTROL
1. battery status and
load display
Status display:
• load indicator: flashes 1x/sec . Indicates momentary consumption of the connected
electronic devices in 20% steps .
• battery status: permanently illuminated . Indicates the remaining capacity of the
batteries in 20% steps .
• Changes between the battery status and the load indicator every 8 seconds .
Error LED:
• Flashes red when error occurs . (see table "self error correction")
Status light:
• Stand-by display: Flashes when the device is in stand-by mode or if the power
consumption is <5% .
• AC on: permanently illuminated when the power is >5% .
1
2
2. LED "Error"
]
3
3. device "on"
43