Grundig 50 GUB 7040 Benutzerhandbuch Seite 174

NETWORK SETUP
Wireless WPS network connection with
PIN
1 Press » «.
>
2 Press » « to select »Settings«.
3
Press » « then »
V
and confirm with »
– »NETWORK« menu will be displayed.
4 Press » « to select »Join Network Using
V
WPS (PIN)« and press »
– 8-digit pin code is displayed in the
wireless WPS menu.
JOIN NETWORK USING WPS (PIN)
Cancel
Network
Notes:
Refer to the manual of your router to find
7
out how the PIN is entered via a PC.
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
5
Use a computer to enter PIN to the router
(e.g. AVM FRITZ!Box: menu item WLAN
Settings... WPS) and save.
– »Connected to Wi-Fi network
"Modem_1".« will be displayed and the
modem will be connected.
6 In the »NETWORK« menu, press »
check status of the network connection.
– Network connection status will be
displayed.
7
Press » « to return to the previous menu or
press » « to return to »Home« menu.
74 ENGLISH
-------------------------------------------------------------------------------------------
>
« to select »Network«
«.
«.
Searching for Wi-Fi...
To connect to the Internet
using a WPS PIN, please enter
the following PIN on your
Wi-Fi router. This setup can
take up to two minutes.
61913271
8!
Auto connection by inputting the
network password
If your router does not support "WPS-PBC" or
WPS PIN entry, use this method to connect.
1 Press »
>
2 Press » « to select »Settings«.
3
Press »
V
and confirm with »
– »NETWORK« menu will be displayed.
Network
4 Press »
V
press »
– Available wireless networks will be
displayed in the »SEE ALL NETWORKS«
menu.
5 Press »
V
want to connect to and confirm with »
– Wireless connection password screen will
be displayed.
6
Select the required character with »
>
» «, » « or »
V
character with »
– You can press »
uppercase and lowercase letters.
– You can press »#$%« / »äçé«
switch between special characters.
« to
– Press »
§
7
Press »
8!
– Modem will be connected.
8 In the »NETWORK« menu, press »
check status of the network connection.
– Network connection status will be
displayed.
9
Press »
press »
«.
>
« then » « to select »Network«
«.
NETWORK
Modem_1
WPA2 PSK
Modem_2
WPA2 PSK
Modem_3
WPA2 PSK
See All Networks
Join Network Using WPS (Button)
Join Network Using WPS (PIN)
« to select »See All Networks« and
« to confirm.
« or » « to select the network you
Λ
« and move to the next
Λ
«.
« to switch between
« to delete the character typed.
« to select »CONNECT«.
« to return to the previous menu or
« to return to »Home« menu.
Signal Strength
Very Good
Security
WPA2 PSK
Available
«.
<
«,
» « to
« to
8!