Grundig 50 GUB 7040 Benutzerhandbuch Seite 124

PICTURE / SOUND SETTINGS
»Film mode« detects and processes feature
7
films automatically for all channel sources.
This means that you get the optimum picture
at all times.
This functions in the mode 480i, 576i and
1080i in TV playback and for other channel
sources.
The »Film Mode« will be enabled for
programmes that do not have a feature film
signal, and insignificant problems may be
observed such as dull pictures, incorrect
subtitles or fine lines on the picture.
»Sharpness« – It ensures that blurry images
7
are clearer in a scene.
»Noise Reduction« – – Reduces the visible
7
"snow" by displaying the picture a little less
sharply and creating a slight blurring. Thus,
it must be used as little as possible with
good picture material.
»Block Noise Reduction« – This function
7
can only be selected with digital receiver
sources and AV pre-sets. It reduces
any interference from artefacts (pixel
blocks) from digital programmes due to
MPEG compression (such as from DVB-T
receivers and lower transmission rates or
DVD players).It reduces any interference
from defects (pixel blocks) from digital
programmes due to MPEG compression
(such as from DVB-T receivers and lower
transmission rates or DVD players).
24 ENGLISH
---------------------------------------------------------
Restoring factory defaults for picture
settings
1 To reset the changes made in the »Picture
Settings« menu, press »
to Default« and confirm with »
– When resetting, the picture mode that
is selected at that time will not be reset.
All the other settings will be restored to
default.
2
Press » « to go to the previous menu or
press » « to return to »Home« menu.
« to select »Reset
V
«.