Using External Devices; Equipment Control - Grundig 50 GUB 7040 Benutzerhandbuch

USING EXTERNAL DEVICES

Equipment control

Your television is equipped with an equipment
control function. You can use this function to add
the remote of your Fire TV and external devices
that Alexa can control.
1
Press » «.
>
2 Press » « to select »Settings«.
>
3
Press » « then »
V
Control« and confirm with »
– »EQUIPMENT CONTROL« menu will be
displayed.
EQUIPMENT CONTROL
Add Equipment
Equipment Control
4 Confirm »Add Equipment« with »
– »ADD EQUIPMENT« menu will be
displayed.
Note:
Additional procedures are explained in the
7
following sections.
« to select »Equipment
«.
Add additional devices that
Fire TV and Alexa can switch
to or control.
«.
---------------------------------------------------------------
Soundbar control
You can use your Fire TV remote or Alexa to
turn on/off your Soundbar, adjust its volume
and change inputs. Installation will take 5 to 10
minutes.
1
Confirm »Soundbar« with »
– »Which brand of soundbar do you
have?« will be displayed.
2 Press » « or »
V Λ
brand and press »
Note:
If the brand of your soundbar is not in the
7
list, please select »Brand not listed«.
3
Confirm »Next« with »
4
To turn off the soundbar, press »
Fire TV remote.
5 Wait for 10 seconds and then press »
turn the soundbar on again.
– »Did your soundbar turn off and then
back on when you pressed »
displayed.
6 If the Soundbar is turned on with the Fire TV
remote, select »Yes«;
or
If there was no response, select »No« and
press » « to confirm.
7 Press »+« and »-« on the Fire TV remote to
change the volume for the soundbar.
8
If the volume of the soundbar is changed
with the TV remote, select »Yes«;
or
If there was no response, select »No« and
press » « to confirm.
9
»Your Fire TV remote has been updated«
will be displayed.
10 To complete installation, confirm »OK« with
» «.
«.
« to select the soundbar
« to confirm.
«.
8 « on the
8
8 «?« will be
ENGLISH
« to
65