Grundig 50 GUB 7040 Benutzerhandbuch Seite 120

SETTINGS
Tuning digital cable television channels
(DVB-C)
30
Press » « or »
V Λ
and press » « to confirm.
– »TRANSMISSION METHOD« menu will
be displayed.
31 Press » « or »
V Λ
Scan« or »Cable - Auto Scan« and press
» « to confirm.
– »Quick« scanning function sets the
channels according to the cable operator
information in the broadcasting signal.
– »Auto« scan function scans the entire
frequency range selected. With this
search option, search can take a long
time. This search type is recommended.
Some cable providers do not support
»Quick« scan.
– »Search« menu will appear and channel
search will start.
– Channel search will take some time
depending on the number of the channels
to be searched.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You can obtain such information
from your cable provider or find them in
Internet forums.
32 Confirm »Done« with »
setting process and display the Home menu.
20 ENGLISH
------------------------------------------------------------------------------------------------------------------
« to select »Cable/TV«
« to select »Cable - Quick
« to complete the
Tuning terrestrial digital television
channels (DVB-T/T2)
33
Press » « or »
V Λ
and press » « to confirm.
– »TRANSMISSION METHOD« menu will
be displayed.
34 Select »TV - Auto Scan«.
– »Search« menu will appear and channel
search will start.
– Channel search will take some time
depending on the number of the channels
to be searched.
35
Confirm »Done« with »
setting process and display the Home menu.
« to select »Cable/TV«
« to complete the