Operation With Common Interface; What Is Common Interface; Inserting The Ca Module; Access Control For Ca Module And Smart Cards - Grundig 50 GUB 7040 Benutzerhandbuch

OPERATION WITH COMMON INTERFACE

What is common interface?

Common Interface (CI) is an interface for DVB
7
receivers.
Scrambled channels can only be viewed with
7
a CA module suitable for the encoding system
and the corresponding smart card.
The television set is equipped with a Common
7
Interface slot into which CA modules from
various providers can be inserted.
You can insert the provider's smart card
7
into the CA module in order to enable the
scramble channels you want to see.

Inserting the CA module

Note:
Switch off the appliance before inserting
7
the CA module in the CI slot.
1
Insert the smart card into the CA module.
2
Insert the CA module with the smart card
into the CI slot on the television.
Note:
To see which CA module is in the Common
7
Interface slot, go to the »CA - Module«
submenu.
When you insert a CA module into the
7
CI slot on the television for the first time,
wait a few moments until the television has
registered the CA module.
Access control for CA module
and smart cards
1 Press » «.
>
2
Press » « to select »Settings«.
>
3
Press » « then »
V
confirm with » «.
4 Press » « to select »CI Card« and confirm
V
with » «.
Notes:
This menu give operating instructions and –
7
after you enter your PIN code – access to
channels of the PAY-TV provider.
Other settings are described in the manuals
7
for your CA module and smart card.
The CA module is not supported in some
7
countries and regions. Please consult your
authorised dealer.
5
Press » « to return to the previous menu or
press » « to return to »Home« menu.
---------------------
« to select »Live TV« and
ENGLISH
69