Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Kicker KM Benutzerhandbuch

Km koax-system
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
IMPORTANT SAFETY WARNING
Prolonged continuous operation of an amplifi er, speaker, or subwoofer in a distorted, clipped or over-
powered manner can cause your audio system to overheat, possibly catching fi re and resulting in serious
damage to your components and/or vehicle. Amplifi ers require up to 4 inches (10cm) open ventilation.
Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and
any surface.
The KICKER KM coaxial speakers are specifi cally designed for mounting in free-air applications. The
speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound
coming off the front of the driver from the sound radiating from the back of the driver. This isolation is
usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated
rear chamber.

SPECIFICATIONS

Model:
Woofer [in, mm]
Tweeter [in,mm]
Rated Impedance [Ω]
Peak Power Handling [ Watts]
Continuous Power Handling [Watts RMS]
Sensitivity [1W, 1m]
Frequency Response [Hz]
Mounting Hole Diameter [in, mm]
Mounting Depth [in, mm]
Grilles
Tweeter Magnet Material
Tweeter Dome Material
Tweeter Design
Woofer Cone Material
Woofer Surround Material
LOCATION
The sound produced by the KM coaxials is directional. Find the best location for stereophonic sound. If
necessary, add more KM coaxial speakers to the system to help distribute and balance the sound-stage.
After determining the best mounting locations, carefully check the areas where the mounting hardware will
be placed.
2
2018 KM Coax Rev F.indd 2
2018 KM Coax Rev F.indd 2
KM Coaxial Speakers
Owner's Manual
KM4
KM65
4, 100
6-1/2, 165
1/2, 13
3/4, 20
2, 4
4
150
195
50
65
89
90
60-20k
35-21k
3-3/4, 94
5-1/16, 128
1-13/16, 46
2-3/8, 59.9
Yes
Yes
Neodymium
Neodymium
PEI (polyether imide) PEI
Balanced Dome
Dome
Polypropylene
Polypropylene
Santoprene
Santoprene
KM8
8, 200
1, 25
4
300
150
92
30-21k
6-9/16, 170
3-5/16, 82.9
Yes
Neodymium
PEI
Dome
Polypropylene
Santoprene
11/5/2018 10:27:36 AM
11/5/2018 10:27:36 AM

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Km4Km65Km8

Inhaltsverzeichnis