Yamaha MUSICCAST MCR-N470D Kurzanleitung Seite 9

◆ BLUETOOTH
1
BLUETOOTH
Press [BLUETOOTH].
• If you are asked for a passkey, enter the number "0000."
Note
• If a Bluetooth device that was previously connected is near this unit, press [BLUETOOTH] to search for the device and connect to it. (The Bluetooth setting of the
Bluetooth device must be set to ON.)
◆ AUX
Before connecting, unplug the power cable from the outlet, and
CAUTION
lower the volume level on both this unit and the external device.
Stereo pin cable
(RCA connector)
Connect the external device to this unit before switching to the AUX input
source.
The cables are not included with this unit.
2
-------
Select this unit in the Bluetooth
settings of your device.
3.5 mm stereo
mini-plug cable
3
Wi-Fi
BLUETOOTH
Play back music using your
Bluetooth device.
Once connected, the Bluetooth
indicator lights up.
1
AUX
Press [AUX].
Disconnecting a Bluetooth
device
A Bluetooth device can be
disconnected using the methods
below.
• Perform a disconnect operation
using the Bluetooth device.
• Switch the unit to another source
or set its power to standby.
2
Play back the connected external
device.
En
5