Inhaltsverzeichnis
Werbung
Anleitung BAS 4,8 SPK1
13.04.2006
GB
Never allow the battery pack to discharge
completely. This will result in damage to the Ni-Cd
battery pack!
Adjusting the torque (Figure 1)
The Einhell battery-powered screwdriver is equipped
with a 6-step mechanical torque adjustment facility.
The torque for a specific size of screw is selected
with the set-collar (Figure 1). The correct torque
depends on several factors:
on the type and hardness of material in question
on the type and length screws used
on the requirements needing to be met by the
screwed joint.
The clutch disengages with a grating sound to
indicate when the set torque is reached.
l
ON/OFF direction switch (3)
The slide switch (2) over the ON/OFF direction
switch can be used to secure the BAS 4,8 against
being switched on unintentionally. The switch (3) can
be used to reverse the direction of rotation. You
should wait for the tool to stop before changing the
direction of rotation. If not, the gearing may be
damaged.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.
Technical data
Voltage supply
Speed
0-160 rpm
Torque
Forward and reverse rotation
Battery charging voltage
Battery charging current
Mains voltage for charger
230 V ~ 50 Hz
Sound pressure level LPA:
52.6 dB(A)
Sound power level LWA:
65.5 dB(A)
12
7:35 Uhr
Seite 12
–
Vibration
a
w
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
!
Old and defective batteries do not belong in the
refuse bin. Think of the environment! Cadmium is
toxic. For correct disposal, return old and defective
batteries postage-paid to ISC or take them to your
local old battery depot. Ask at your town hall for
details of the old battery depots in your area.
4.8 V =
6 levels
yes
6 V =
300 mA
< 2.5 m/s
2
iNTERNATiONALES SERViCE CENTER GmbH
Werbung
Inhaltsverzeichnis
