Gewiss Chorus GW 10 755 Handbuch Seite 31

PROGRAMMING WITH THE EASY CONFIGURATOR
Configuration parameters (Easy) - actuator section
Once the required function has been created, the operating parameters of the actuator can be set.
The available parameters, in relation to the function created, are listed in the tables given below.
The value underlined is the default value.
Function: for all functions
Parameter: operation mode
shutters
sunblinds
Function: alarm
Parameter: alarm mode
no alarm
alarm position up
alarm position down
Roller shutter movement
Venetian blind movement and slat adjustment
alarm signal ignored
complete roller shutter opening
complete roller shutter closure
31
E
N
G
L
I
S
H