Gewiss Chorus GW 10 755 Handbuch Seite 29

PROGRAMMING WITH THE EASY CONFIGURATOR
Names of the functions - push-button panel section
toggle
edges
timer mode
scene
dimming toggle
dimming
blinds toggle
blind control
Names of the functions - actuator section
blinds toggle
blind control
scene
priority control
wind sensor
rain sensor
For more details about the programming procedures please refer to the Easy controller
documentation.
cyclic ON/OFF switchover command
fronts management command
ON command with timer
(the time is set on the actuator)
scene management command
dimmer management command with 1 channel
dimmer management command with 2 channels
roller shutters or Venetian blind management command
with 1 channel
roller shutters or Venetian blind management command
with 2 channels
moving roller shutters or Venetian shutters with 1 push-button
moving roller shutters or Venetian shutters with 2 push-buttons
scene implementation and storing
forcing implementation
implementation with wind alarm
implementation with rain alarm
29
E
N
G
L
I
S
H