GF d160 Betriebsanleitung Seite 37

Instruction manual Core cutter
6. If chips remain in the chip area of the hole drill anyway:
WARNING
Chips remain in the chip area of the core cutter!
Risk of injury when trying to remove chips manually.
 Only remove chips manually when the machine is turned off.
Fig. 6
7. Turn off the machine after completion of the drilling.
Carefully pull core cutter out of the pipe, see Fig. 6
WARNING
Hand injuries caused by sharp blades during the removal of the drill core!
 Carefully remove drill core when the machine is turned off.
Working with the core cutter
35