GF d160 Betriebsanleitung Seite 29

Instruction manual Core cutter
WARNING
Risk of injury and/or danger to life through electricity when the drilling
machine gets in contact with the medium as well as risk of injury caused
by the uncontrolled evasion of the medium!
 Prior to spot-drilling the pipe: completely release the pressure in the
pipeline and completely drain it
 Ensure that no explosive or unhealthy gas mixture has formed or is left
in the pipe.
 Observe accident prevention regulations, especially
- works on gas pipes (e.g. BGR 500)
- Guidelines for the use of electric operating material
(e.g. BGI 594)
- Regulations according to the DVGW (German Technical and
Scientific Association for Gas and Water)
Country-specific provisions
-
WARNING
Risk of injury and/or material damage during operation!
 Only use drilling machines with safety clutches.
 Ensure a safe stand.
 Hold machine with both hands.
 Wear protective equipment (ear protection, safety goggles etc.).
WARNING
Hand injuries caused by sharp carbide tips!
 Handle core cutter with care.
Safety and responsibility
27