Safety And Responsibility; Intended Use; Safety Information - GF d160 Betriebsanleitung

GB USA

Safety and responsibility

3 Safety and responsibility
3.1

Intended use

The Core cutter is solely intended for the drilling of holes in PE and PVC pipes.
The drilling of plastic or GFK pipes with mineral additions damage the Core
cutter.
3.2

Safety information

 The machine must only be used in technically perfect condition, and it is
essential to observe the safety information.
 Store complete documentation close to the machine.
 Observe generally accepted accident prevention regulations.
 Only use machine as intended, see intended use. The user is solely liable for
damages caused by non-intended use.
 Only use the dimensions and materials listed in this manual. Only use other
materials upon consultation with the customer service of GF Piping Systems.
 Only use original spare parts and materials by GF Piping Systems.
 Check machine for externally apparent damages and defects. Immediately
remedy all damages and defects.
 Turn the machine off and let it run down prior to tool replacement, transport,
maintenance, and repair and adjustment works.
 Regularly train personnel on all questions pertaining to the locally accepted
regulations on occupational safety and environmental protection, especially on
pressure-retaining pipelines.
 Be familiar with, understand and observe instruction manual and the notes
contained within.
"Help towards making your working place safe."
 Inform the responsible person about any discrepancies from the operational
behaviour.
 All works must be carried out safety-consciously.
26
Instruction manual Core cutter