Using The Refrigerator; Energy Saving Tips - Dometic HC302 Montage- Und Bedienungsanleitung

Using the refrigerator

6.4 Connecting the refrigerator to the power supply
A
NOTICE!
UK only: The refrigerator is supplied with a plug fitted with 3 A fuse. In
case this fuse has to be to changed, a 3 A ASTA approved (BS 1362) fuse
must be used.
➤ Connect the plug of the connection cable into the AC mains.
➤ Insert the battery into the thermometer (see chapter "Replacing the battery of the
thermometer" on page 17).
✓ The display turns on.
For the first two seconds the display will not show temperature values; it shows
"--.-". Then the temperature read from the sensor is shown.
6.5 Mounting and removing the door handle
➤ Mount the handle as shown (fig. 7, page 6).
➤ Remove the handle as shown (fig. 8, page 6).
7 Using the refrigerator
I
NOTE
• Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 19).
• Always leave some space between the medicaments in the cabinet
to ensure efficient and even cooling. If the drawers are packed too
tightly there may be unacceptable temperature values.
7.1

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• Do not open the refrigerator more often than necessary.
• Do not leave the doors open for longer than necessary.
• Defrost your refrigerator as soon as a layer of ice forms.
16
HC302, HC502
EN