Parts Description; Before The First Use; Cleaning And Maintenance - TriStar MX-4146DR Bedienungsanleitung

Instruction manual
• Unplug the appliance from the socket when you are not using it.
• Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly grab this appliance, but first pull the plug from
the socket.

PartS deScriPtion

1. Cylinder block
2. Speed switch
3. Chopper
4

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V 50Hz)
• Never use the mixer for longer than 1 minute continuously, after this
allow the mixer to cool down for 5 minutes.
1
• The blades of the slicing and chopping disk and the blade chopping are
very sharp, avoid physical contact, you can seriously injure.
2
uSe
using the chopper
• Turn the engine clockwise to chopper until it clicks.
• To unlock the chopper, twist the chopper clockwise loose.
• Plug in the power and select the speed switch to the desired speed. If
you press one of the switches off the device the device starts directly, by
releasing the switch stops the machine immediately.

cleaning and maintenance

3
• Clean the appliance with a damp cloth. Never use harsh and abrasive
cleaners, scouring pad or steel wool, which damages the device.
• Never immerse the device in water or any other liquid. The device in not
dishwasher proof.
• The blades of the slicing and chopping disk and the blade chopping are
very sharp, avoid physical contact, you can seriously injure.