Display Controls - Hisense RS 694N4TC2 Bedienungsanleitung

11

Display controls

Use your appliance according to the following control guidelines, your product
has a control panel as shown in the diagram below.
When the appliance is powered on for
the first time, the backlighting of the
icons on the display panel starts
working. If no buttons have been
touched and the doors are closed, the
backlighting will turn off after 60
seconds.
The control panel consists of two
areas about temperature, and one
area about different modes.
Caution! When you set a
temperature, you set an average
temperature for the whole refrigerator
cabinet. Temperatures inside each
compartment may vary from the
temperatures displayed on the panel,
depending on how much food you
store and where you place it. High or
low room temperature may also affect
the actual temperature inside the
appliance.
NOTE:High temperature setting will
accelerate food waste.
For optimum food preservation,
we recommend that when you
start your refrigerator for the
first time, the temperature for
the refrigerator is set to 4°C ,
and the freezer to -18°C.
Non Plumbing