Axis Communications 216FD Installationsanleitung Seite 9

AXIS 216FD Installation Guide
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually set a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 216FD.
Automatic discovery
1. Check that the AXIS 216FD is connected to the network and that power has been
applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 12 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment as your computer.
2. Click the button
and IP address for the AXIS 216FD. The serial number is located on the product label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page button to access the camera's web pages.
5. See page 12 for instructions on how to set the password.
Downloaded from www.Manualslib.com
Set IP address using serial number and enter the serial number
manuals search engine
Page 9