Package Contents - TaoTronics TT-BH036 Bedienungsanleitung

EN

Package Contents

1 x Wireless Active Noise Cancelling (ANC) Headphones (TT-BH036)
1 x USB Charging Cable
1 x Airline Adapter
1 x 3.5mm Audio Cable
1 x User Guide
1 x Travel Pouch
Note: There will be voice prompts when the headphones are being powered on / off / paired to a device.
How to Use
1. Charging
1) Connect the charging port with any USB charging adapter or active computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns off.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each other (within 3 feet / 1 meter).
2) Toggle the Switch from Off to Bluetooth® to power on and bring the headphones into pairing mode
with the LED indicator ashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth® connections.
4) Find " TaoTronics TT-BH036" in the search results. Tap on the name to connect. Once connected,
the LED indicator will ash blue once every 5 seconds.
Note:
· The Bluetooth® headphones can remember previously paired devices. If you have previously paired the
headphones with a device, simply switch on the headphones and your device, they will automatically
connect.
· If the headphones won't reconnect with the previously paired device, press and hold the Play / Pause
Button and Volume + Button at the same time for 5 seconds until you hear a "Pairing" voice prompt and the
LED indicator starts to ash red and blue alternately to re-pair again.
If the headphones cannot pair with your Bluetooth device, clear the pairing history as below:
1. Turn on the Bluetooth headphones and bring it into pairing mode, the indicator will ash red and blue
alternatively.
2. Press and hold the Play / Pause Button and the Volume - Button at the same time for 5 seconds until
the LED indicator ashes purple.
3. You can just pair the headphones just like when they are new.
3. Button Controls
Buttons Functions
Power / Bluetooth / Toggle to Bluetooth
®
ANC Switch your device
Toggle to ANC to activate noise cancelling
Toggle to Off to turn off the headphones
Press to adjust volume
Press and hold to move to next / previous track
Volume + / - Button
Press simultaneously to activate Voice Control
Press simultaneously to mute when in a call
Press to answer / hang up phone calls
Play / Pause Button
Double press to redial
to turn on the headphones and start pairing with
®
01/02