PALSON Techno Gebrauchsanleitung Seite 7

Operating the appliance
• Plug into a mains socket.
• The monitoring lamp on the "ENCENDIDO/APAGADO" switch lights and you will hear a beep.
• The appliance is now on standby.
• Place a suitable cooking utensil in the centre of the hotplate.
• Press the "ENCENDIDO/APAGADO" switch once to turn on the induction hotplate. The "power" monitoring lamp
blinks and you will hear a beep.
• Press the "POTENCIA" key. The preset power rating is "1300"; the appliance starts operating.
• You can use the ▲ / ▼ keys to change the values at any time, setting them to 300W, 600W, 800W, 1000W, 1200W,
1300W, 1500W, 1600W, 1800W or 2000W.
• Press the "TEMP" key to select the temperature. The preset temperature of "120°C" is selected and the appliance
starts operating.
• You can use the ▲ / ▼ keys to change the values at any time, from 60 to 240°C. (Temperature settings: 60, 80,
100, 120, 140, 160, 180, 200, 220 and 240°C)
• Timer function. After selecting the temperature mode, press the "TIEMPO" button. The number "0" will appear
on the screen. Use the ▲ / ▼ keys to select the operating time in 5-minute increments (up to a maximum of 180
minutes). When the time expires, a beep will sound and the appliance will automatically enter the standby mode.
Note: You can change the duration of the timer function at any time using the arrow keys. Because of the appliance's
memory function, changing the time does not change the power or temperature settings.
You can also change the power or temperature settings using the appropriate buttons to change the settings without
changing the preset time.
• When you have finished cooking or heating, unplug the appliance from the mains!
• Do not use empty cooking utensils on the "black glass" surface. Heating empty saucepans or frying pans activates
the overheating protection and the appliance will turn off.
• Do not operate the appliance if it is damaged in any way or malfunctions.
• Using accessories or spare parts not recommended by the manufacturer may damage the appliance and cause
injuries.
Cleaning and maintenance
• Unplug the appliance from the mains before cleaning. Do not use caustic cleaning products and make sure that no
water enters the appliance.
• To protect yourself against electric shocks, never immerse the appliance, the power cord or the plug in water or
other liquids.
• Clean the "black glass" surface with a damp cloth or use a gentle, non-abrasive soap solution.
• Clean the body and control panel with a soft cloth or a mild detergent.
• Do not use products that contain petrol to avoid damaging the plastic parts, body or control panel.
• Do not use inflammable, acid or alkaline materials or substances near the appliance, as this could shorten the
appliance's life and cause an explosion when it is turned on.
• Make sure that the bottom of the cooking utensils does not scratch the "black glass" surface.
• Make sure that the appliance is clean before storing in a dry place.
Thank you for choosing one of our products.
Downloaded from www.Manualslib.com manuals search engine
7