Maintenance And Service; Maintenance And Cleaning - Bosch GLI PortaLED 102 Professional Originalbetriebsanleitung

OBJ_BUCH-1497-002.book Page 11 Monday, November 14, 2011 10:47 AM
Operation
Starting Operation
Inserting the Battery (see figure A)
Use only original Bosch lithium ion batteries with the
voltage listed on the nameplate of your cordless work-
light. Using other batteries can lead to injuries and pose a
fire hazard.
Insert the charged battery 5 into the battery port until it can
be felt to engage and is seated flush.
Switching On and Off
To start the cordless worklight, press the On/Off switch 1.
To switch off the cordless worklight, press the On/Off switch
1 again.
Adjusting the Brightness
Briefly press the On/Off switch 1 to switch on the cordless
worklight with maximum brightness. To adapt any of the 3
brightness steps, press and hold the On/Off switch 1 until the
desired brightness is reached.
Temperature Dependent Overload Protection
When exceeding the allowable heat-sink temperature of
60 °C, the cordless worklight switches off. Allow the cordless
worklight to cool down, then switch the cordless worklight on
again.
Working Advice (see figure B–C)
With the support bracket 6, you can lock the case lid in a 45 °
position. The cordless worklight can also be operated when
the case lid is completely opened or closed.
When the lighting duration is ≤10 minutes, the cordless work-
light flashes 3x and the luminous efficiency is lower.

Maintenance and Service

Maintenance and Cleaning

When the battery is no longer operative, please refer to an au-
thorised after-sales service agent for Bosch power tools.
The cordless worklight is maintenance-free and and contains
no components that must be replaced or maintained.
To avoid damage, clean the plastic lens of the cordless work-
light only with a dry, soft cloth. Do not use cleaning agents or
solvent.
If the cordless worklight should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an authorized after-sales service agent for Bosch
power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the cordless worklight.
Bosch Power Tools
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
English | 11
1 619 929 J08 | (14.11.11)