Maintenance And Service - Bosch GLI 18V-300 Professional Originalbetriebsanleitung

Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the Electronic Cell Protection (ECP). A protective circuit
switches the cordless worklight off when the battery is
drained.
Do not continue to press the On/Off switch after the
u
worklight has been automatically switched off. The
battery can be damaged. Ensure that the battery is
charged and that the worklight has cooled before switch-
ing on the worklight again.
To remove the battery (1), press the release button (2) and
pull the battery out of the cordless worklight. Do not use
force to do this.
Follow the instructions on correct disposal.
Battery charge indicator
The green LEDs on the battery charge indicator indicate the
state of charge of the battery. For safety reasons, it is only
possible to check the state of charge when the power tool is
not in operation.
Press the button for the battery charge indicator or
show the state of charge. This is also possible when the bat-
tery is removed.
If no LED lights up after pressing the button for the battery
charge indicator, then the battery is defective and must be
replaced.
Battery model GBA 18V...
LEDs
3× continuous green light
2× continuous green light
1× continuous green light
1× flashing green light
Battery model ProCORE18V...
LEDs
5× continuous green light
4× continuous green light
3× continuous green light
2× continuous green light
1× continuous green light
1× flashing green light
Bosch Power Tools
Operation
Starting Operation
Inserting the Battery
Push the charged battery (1) into the battery holder until it
clicks into place.
Switching On and Off
To switch on the cordless worklight, press the on/off
switch (4).
To switch off the cordless worklight, press the on/off
switch (4) again.
Practical Advice
Utility hook (see figure A)
You can use the utility hook (5) to attach the cordless work-
light to an object.
Swivelling the lamp head (see figure B)
The lamp head (3) can be swivelled in six different settings
to suit the application.
Examples of applications are:
– Room lighting
– Glare-free workplace lighting
– Floor lighting
to

Maintenance and Service

Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
The cordless worklight is maintenance-free and does not
Capacity
contain any parts that need to be replaced or maintained.
60−100 %
To avoid damage, clean the glass on the cordless worklight
30−60 %
with a dry, soft cloth only. Do not use any detergents or
solvents.
5−30 %
0−5 %
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
Capacity
ies.
80−100 %
In all correspondence and spare parts orders, please always
60−80 %
include the 10‑digit article number given on the nameplate
40−60 % of the product.
20−40 %
Great Britain
Robert Bosch Ltd. (B.S.C.)
5−20 %
P.O. Box 98
0−5 %
Broadwater Park
English | 9
1 609 92A 5X5 | (26.04.2021)