Diagnostic-Led - DoorBird D101 Installationsanleitung

Step 12: Downloading and installing the app
Download the "DoorBird" app by Bird Home Automation onto your mobile device from the Apple
app store or Google Play store.
If you use Wi-Fi for connecting the DoorBird to your Internet router, first go to "Settings > Wi-Fi
Setup" and follow the instructions.
If you have finished the Wi-Fi set-up or have connected the video doorbell to your Internet router by
means of a network cable, go to "Settings > Add device" and click on the QR code icon in the "User"
field. Scan the user QR code found on the "Digital Passport" that accompanies the video doorbell.
Since Apple uses very high quality microphones, loudspeakers and digital audio components that are
perfectly in tune with one another, the voice quality with an iPhone or iPad is usually noticeably
better than with an Android smartphone or Android tablet.

Diagnostic-LED

Behind the Light sensor there is a small LED light that can light up in various different colours. This
LED light is only lit up for five minutes after the video doorbell has been supplied with power. It lights
up as soon as the video doorbell is supplied with power.

Red: Booting.

Green: Booting has been completed.
Diagnostic-sounds
After around two to five minutes, the video doorbell emits brief diagnostic sounds after it has been
connected to the power grid.

1x diagnostic sound: The DoorBird is connected to the Internet.

2x diagnostic sounds: The DoorBird is able to communicate with the router, but cannot
access the Internet.

3x diagnostic sounds: The DoorBird has no connection to the network.
7