Filter Overview; Use And Operations - Klarstein Vita Pure 2G Bedienungsanleitung

• PRE-FILTER: Captures initial dust and allergen particles.
• HEPA FILTER: Captures 99.97% of dust, smoke, pollen and other allergens. Pre-Filter and Activated Carbon
Filter are combined to the HEPA Filter.
• ACTIVATED CARBON FILTER: Absorb formaldehyde, benzene and other noxious gas.
• UV-C LIGHT: 254nm UV light eliminate germs and bacteria.
• Photo Catalyst: PCO spray on the UV lamp cover to help eliminates odors etc.
Before first Use
• Carefully remove your air purifier from box and bag.
• Select a firm, level and flt location for the air purifier. For proper air flow, locate the unit at least 1 foot from
any wall or furniture. Make sure none of the grills are blocked.
• Plug the power cord into a right voltage AC outlet.
IMPORTANT:
When moving the air purifier, always lift unit by the carrying handle located on back. When the unit is not in
use, switch it off and unplug it.
Control Panel and Buttons
POWER/UV-C: Press this button
to turn on or switch off the unit.
And UV light and Ion genera-
tor also control by this button.
NOTE: Ion generator ON and
OFF with UV lamp at the same
time.
Speed: The fan speed of the unit can be adjusted when the unit is in operation (I = low, II =
medium, III = high). Each time that you press on the (SPEED) button, the speed is adjusted
from L (low) to M (medium) to H (high).
TIMER: By pressing this button, the purifier can be timed to operate for intervals of 2
hours, 4 hours and 8 hours, stopping automatically when the selected operating
time has elapsed. Press this button (Timer) to select the required operating time. A warning
light automatically indicates the remaining operating time. To select the continuous opera-
ting mode, press the button repeatedly until there are no more indicator lights lit up.
9

Filter Overview

Use and Operation