Herunterladen Diese Seite drucken

AC Schnitzer 2511 10 410 Montageanleitung Seite 15

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

F itt in g In s truct ion s
AC Schnitzer Aluminium Gear Knob with Digital Gear Display
3. Teaching the AC Schnitzer Gear Knob
Starting the procedure:
After turning on the cars ignition, the user is always asked
whether the programming procedure should be started.
When the two segments at the top left of the display flash ( see
Fig. 13 ) put the car into first gear. If the car is already in first
gear, proceed to the next step.
The segments at the bottom right of the display will then start
to flash ( see Fig. 14 ), which tell you to put the car into fourth
gear. When you do this, the system remembers the gearshift
positions of these gears. You are then asked again to reselect
gears 1 and 4.
If this is successful, the programming procedure can start. If
gears 1 and 4 are not selected at this time, the programming
procedure is stopped.
Perform the programming procedure:
Switch on ignition!
All gear positions of the system are displayed by a number or
segment flashing on the display in sequence. Then, the
indicated gear must be selected by user. Gear selection takes
place in two different gradients. In the first phase, the vehicle
should be facing forward on a gradient and positioned in the
opposite direction for the second phase.
The end of the first phase is indicated by the display of a line
( see Fig. 12 ). Between the two phases, you have about 60
seconds to change the position of the vehicle. The lapse of this
time is indicates on the display by a downwards count from 9
to 0.
The gear positions are taught in the phases in the following
order: gears 1 to 6 ( see Figs. 2 – 7 ), reverse gear ( see
Fig. 11 ), centre neutral position ( see Fig. 15 ), left neutral
position ( see Fig. 16 keep in position here ) and right neutral
position ( see Fig. 17 keep in position here ).
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 2511 10 410 / Issue: 16.09.2008
7
2
3
1
8
6
7
13
11
12
17
16
4
5
9
10
14
15
Fax -135

Werbung

loading