Installing Windows - ASROCK K10N78FullHD-hSLI Schnellinstallationsanleitung

2 . 1 4 2 . 1 4 Driver Installation Guide 2 . 1 4 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2 . 1 4 2 . 1 4 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 5 2 . 1 5

2 . 1 5 Installing Windows

2 . 1 5 2 . 1 5 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista 64-bit W 64-bit W
Vista Vista Vista 64-bit W 64-bit W ithout RAID F 64-bit W
TM TM TM TM TM
If you want to install Windows
Vista TM 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.15.1 Installing Windows 2.15.1 Installing Windows 2.15.1 Installing Windows
2.15.1 Installing Windows 2.15.1 Installing Windows
F F F F Functions unctions unctions
unctions unctions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for WindowsXP
2. Generate RAID Driver diskette for WindowsXP
3. Generate AHCI Driver diskette for WindowsXP64
4. Generate RAID Driver diskette for WindowsXP64
5. Exit
Reboot system now
Press any key to continue
ASRock
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
®
ithout RAID F ithout RAID F unctions unctions
ithout RAID F ithout RAID Functions unctions unctions
® ®
XP, Windows XP 64-bit, Windows
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
®
® ®
XP / Windows XP 64-bit on your SATA / SATAII HDDs
Advanced screen
® XP / XP 64-bit.)
K10N78FullHD-hSLI Motherboard
/ / / / /
TM TM TM
TM TM
® TM ®
Vista or Windows
IDE Configuration.
3 5 3 5 3 5
3 5 3 5