ASROCK K10N78FullHD-hSLI Schnellinstallationsanleitung Seite 20

Step 4. Boot into OS. Install Hybrid SLI
TM
Hybrid SLI
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 5. Restart your computer. Then you will find the Hybrid icon on your Windows
taskbar.
Step 6. The default setting is GeForce
need to adjust the setup anymore.
B. HybridPower B. HybridPower
B. HybridPower B. HybridPower B. HybridPower TM TM
TM TM TM
Step 1. Install one compatible PCI Express graphics card to PCIE2 slot (green). For
the proper installation procedures, please refer to section "Expansion Slots".
Step 2. Boot your system. Press <F2> to enter BIOS setup. Enter "Advanced" screen,
and enter "Chipset Settings". Then set the option "Hybrid SLI" to [256MB] or
[512MB]. And set the option "Primary Graphics Display" to [Onboard].
Step 3. Save your BIOS change and exit BIOS setup.
Step 4. Power off your system.
Step 5. Connect the monitor cable to the correspondent connector on the I/O shield.
Step 6. Boot into OS. Install Hybrid SLI
Hybrid SLI TM
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 7. Restart your computer. Then you will find the Hybrid icon on your Windows
taskbar. Please click the icon and select the item "Save Power".
2 0 2 0 2 0
2 0 2 0
ASRock
TM
driver from our support CD to your system.
driver is in the following path of ASRock support CD:
® TM
Vista / Vista
TM
driver only has Vista
®
Boost mode (Boost Performance). You do not
TM
driver from our support CD to your system.
driver is in the following path of ASRock support CD:
® TM
Vista / Vista
TM driver only has Vista
K10N78FullHD-hSLI
TM
64-bit.)
TM
32 version, please visit our
TM
64-bit.)
TM 32 version, please visit our
Motherboard
®
®