Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STARTING THE OVEN - SETTING THE TIME
After connecting the oven to the mains power, the time must be set on the clock. The two hour digits flash
on the display.
1.
Turn the "Browse" knob to display the correct hour.
2.
Press the button
3.
Turn the "Browse" knob to display the correct minutes.
4.
Press button
to confirm.
To change the time, for example following a power cut, see the next paragraph (SETTINGS).
SELECTING COOKING FUNCTIONS
1.
Turn the "Functions" knob to the desired function: the cooking settings are shown on the display.
2.
If the values shown are those desired, press
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL
To change the temperature or output of the grill, proceed as follows:
1.
Turn the "Browse" knob to display the desired value.
2.
Press button
to confirm.
The oven automatically confirms your selection 10 seconds after the last operation.
FAST PREHEATING
1.
Turn the "Functions" knob to the symbol
2.
Confirm by pressing
3.
If the proposed temperature is that desired, press button . To change the temperature, proceed as
described in previous paragraphs. The message PRE appears on the display. When the set temperature
is reached, the corresponding value (e.g. 200°C) appears on the display and the acoustic signal
sounds. At the end of preheating, the oven automatically selects the conventional function
At this point food can be placed in the oven for cooking.
4.
If you wish to set a different cooking function, turn the "Functions" knob and select the desired
function.
to confirm; the two minute digits flash on the display.
: the settings are shown on the display.
. To change them, proceed as indicated below.
to select the fast preheating function.
GB31
.
Werbung
Inhaltsverzeichnis
