Werbung
TSM SERIES FRONT PANEL
1. POWER LED: Illuminates when the unit is connected to the mains supply and
switched on.
2. VOLUME CONTROL: Adjusts the overall level available from the monitor.
3. PEAK LED: Illuminates just before the amplifier begins to clip and distort.
Adjust the level control and signal level from your source so this illuminates only
briefly on peaks in the music. Using the monitor with this on all or much of the time
will result in poor sound quality and damage to speakers and electronics.
4. GRAPHIC EQUALISER: A five band graphic equaliser is provided to remove
feedback and fine tune your sound. Feedback may be reduced by moving the slider
at the closest frequency downwards to cut power in that band. For best results use
the EQ only for small adjustments, not to try and redefine the sound completely.
POWER
VOLUME
5
4
6
3
7
2
8
1
9
0
10
PEAK
100
TSM SERIES FRONT PANEL
EQ
340
1K
3.4K
10K
Werbung
