Delivery, Transport, Storage; Delivery; Transport In A Vehicle, Storage - AWG S2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
ID No.
60351534
60278299
10066633
This table lists the common Storz adapters.
Versions without adapters are marked "Anschluss BSP" (British Standard Pipe thread).
These devices are equipped with a pipe thread in accordance with ISO 228 that can be
used to mount further adapter systems.
For versions not listed in the table, the values for the BSP connection apply; the respec-
tive adapter system is not taken into account.
4

DELIVERY, TRANSPORT, STORAGE

4.1

Delivery

The Foam nozzle has been carefully packaged at AWG Fittings GmbH.
After unpacking, check the delivery for damage and verify com-
pleteness.
Any damage must be immediately reported to the carrier.
If parts are missing, immediately inform the responsible specialist
dealer or AWG Fittings GmbH.
The foam nozzle is delivered ready to be connected and is immediately
ready for use in an extinguishing system after connecting with a suita-
ble adapter. No special commissioning is required before first use.
4.2

Transport in a vehicle, storage


The foam nozzle has run dry.
The foam nozzle can be transported and stored in any position.
Especially during transport inside a vehicle, the foam nozzle must not
fall over. If necessary, secure the foam nozzle using a belt. During
transport, the foam nozzle must not be damaged by other heavy equip-
ment.
To ensure proper functioning, the foam nozzle may only be stored in a
clean condition.
M1106B10 I Rev. 02-03/20
Low expansion foam nozzles S2, S4, S8
Type Connection
S4 BSP G2" (male) 866
S8 Storz 75 (B)
S8 BSP G2" (male) 975
ENGLISH
DELIVERY, TRANSPORT, STORAGE
Dimensions [mm]
L W H
85 177
975 126 198
90 177
Weight
[kg]
3.1
4.4
4.0
29 / 40