Handling - AWG S2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
Use of different foam agents
Foam agents from different manufacturers and different
products or types must not be mixed. Applied extinguishing
foams are compatible without any problems.
5.2

Handling

1 Foam tube
2 Grip
3 Hand lever (option)
Fig. 2 Handling
Required flow pressure
The foam nozzle is designed for a flow pressure of 3 to
10 bar on the inlet side. Within this range, optimum foaming
is achieved.

The water hose for connection to the fixed coupling of the foam
nozzle is ready at hand.

The hand lever is closed (Fig. 2/B).
M1106B10 I Rev. 02-03/20
Low expansion foam nozzles S2, S4, S8
4
5
ENGLISH
Fixed coupling
Water hose adapter
USE
31 / 40