Delivery, Transport, Storage; Delivery; Transport In A Vehicle, Storage - AWG M2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
ID No.
603 517 99
603 732 99
604 003 99
This table lists the common Storz adapters.
Versions without adapters are marked "Anschluss BSP" (British Standard Pipe thread) .
These devices are equipped with a pipe thread in accordance with ISO 228 that can be
used to mount further adapter systems.
For versions not listed in the table, the values for the BSP connection apply; the respec-
tive adapter system is not taken into account.
4

DELIVERY, TRANSPORT, STORAGE

4.1

Delivery

The Foam nozzle has been carefully packaged at AWG Fittings GmbH.
After unpacking, check the delivery for damage and verify com-
pleteness.
Any damage must be immediately reported to the carrier.
If parts are missing, immediately inform the responsible specialist
dealer or AWG Fittings GmbH.
The foam nozzle is delivered ready to be connected and is immediately
ready for use after connecting to a hose with a suitable adapter. No
special commissioning is required before first use.
4.2

Transport in a vehicle, storage


The foam nozzle has run dry.
The foam nozzle can be transported and stored in any position.
Especially during transport inside a vehicle, the foam nozzle must not
fall over. If necessary, secure the foam nozzle using a belt. During
transport, the foam nozzle must not be damaged by other heavy
equipment.
To ensure proper functioning, the foam nozzle may only be stored in a
clean condition.
M1107B10 I Rev. 02-03/20
Foam nozzles M2, M4, M8
Type Connection
M4 BSP G2" (male) 632
M8 Storz 75 (B)
M8 BSP G2" (male) 790
ENGLISH
DELIVERY, TRANSPORT, STORAGE
Dimensions [mm]
L W H
265 302
765 304 350
300 370
Weight
[kg]
4.7
7.5
6.1
29 / 40