Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Features
•
Recognition and display of the most frequent installation errors:
short circuit, line/wire interrupt, line/wire mistakes, split pair
•
Self test function and intermittent contact test
•
Error display for each conductor by eight red conductor LED's and one red LED for the shield (F).
•
Display of no error by green LED (G).
•
One key for ON, OFF and start of the test operation (D).
•
Separate Step Key (H) to display list of multiple errors.
•
Automatic shut off of the IE-CT 30 seconds after the last use of key D or H.
•
Nine switches define the pin assignment (C).
•
Numeric display shows error type (B).
•
9 conductor attachment cord (A) for testing shielded installation lines and cables with up to 8
conductors.
•
IE-CT Mainframe and IE-CT Test Boxes are equipped with RJ45 jacks (E and K) allowing also test
of patch cords.
•
Protected against interference voltages up to 80 V AC/DC (100 V up to 5 minutes).
•
Display of extraneous voltages for each conductor including readout of their polarity.
•
Easy use and interpretation of the test results with given help on the IE-CT housing (I).
•
Display for low battery power.
•
Length of installation cable to be tested up to 1000 m.
•
Automatic test operation is shown by flashing LED (G).
•
Battery polarity reversal protection.
•
Line identification by recognition of up to nine test boxes.
•
Recognition and display for wrong set of pin assignment.
•
Low power consumption for long battery life.
17
Werbung
Kapitel
Inhaltsverzeichnis
