Disposal - AWG M0,4 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
4. Insert the conversion screen into the foam tube and position it using
the holders.
5. If necessary, press in the holders by tapping them lightly with a
rubber mallet.
All other repair work on the AWG Medium expansion foam pistol M0,4
may only be performed by AWG Fittings GmbH customer service or by
an authorised specialist workshop.
If you need technical support, please contact our Service Centre:
AWG Fittings GmbH
Service Centre
D-89177 Ballendorf
Telephone: +49 (0) 73 40 / 91 88 98 880
Email: awg-service@idexcorp.com
We will accept devices in need of repair or maintenance, discuss with
you the quickest and cheapest solution, create cost estimates, take
care of the execution of the repair work and are at your disposal for
any questions.
7.3

Disposal

Observe the local regulations regarding proper waste recycling or dis-
posal.
Materials
Foam tube, conversion screen:
Nozzle body, stop valve:
Bottle:
Seals:
38 / 40
Medium expansion foam pistol M0,4
Stainless steel
Aluminium
HDPE plastic
NBR
ENGLISH
MAINTENANCE
M1037B01 I Rev. 02-03/20