Functional Test; Prerequisites - AWG M0,4 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
6

FUNCTIONAL TEST

6.1

Prerequisites

All testing of the AWG Medium expansion foam pistol M0,4 must be
carried out in accordance with the manufacturer's technical documen-
tation and must be documented if necessary.
The following inspections are defined for the Medium expansion foam
pistol M0,4:
– Mandatory BASIC Inspection after each use
– Mandatory STANDARD Inspection every 12 months
– Optional ADVANCED Inspection every 12 months
The STANDARD and ADVANCED inspections may only be carried out
by qualified personnel who have been trained for these inspections:
– Firefighters who have received training as firefighting equipment
maintenance technicians or persons with equivalent qualifications
– or - if desired - directly by the manufacturer
Inspection by the manufacturer
AWG Fitting GmbH offers an inspection as part of its service offering.
Send us the Medium expansion foam pistol M0,4, and you will receive
the inspected device back at the agreed date. You will find a return de-
livery form on our website www.awg-fittings.com. If required, a rental
device can also be provided.
Documenting the inspection result
To meet the requirements for occupational safety and acci-
dent prevention, the test results for each test must be doc-
umented. Please observe the country-specific regulations.
To Germany apply the principles of the DGUV (German
statutory accident insurance). You will find a test chart at
our website www.awg-fittings.com
– Keep the documented test result as proof.
M1037B01 I Rev. 02-03/20
Medium expansion foam pistol M0,4
ENGLISH
FUNCTIONAL TEST
35 / 40