Using In Pc Monitor Mode - Philips 32PF4320 Bedienungsanleitung

Using in PC monitor mode

Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 6).
Note:
When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this
product.
For better performance, good quality VGA cable with good noise isolation filter is recommended.
Choosing PC mode
Press the key on the remote control to switch the TV to PC mode. Press the
PC
TV mode. If there is no PC signal for more than five seconds, the TV automatically goes into standby
mode.
Using the PC menus
Press the key to access the specific settings of the PC monitor mode. Use the cursor keys to
MENU
adjust them (the settings are automatically saved).
Picture
Brightness 39
Colour
Contrast
Sharpness
Colour Temp.
Store
PC Menu
Picture
Audio selection
Features
Reset to Factory
Mode
Features
Phase 33
Clock
Format
Auto Adjust
PC Menu
Picture
Audio selection
Features
Reset to Factory Reset
Mode
PC Menu
Picture
• TV
Audio selection
• PC
Features
Reset to Factory
Mode
8
Picture
• Brightness/Contrast
contrast.
•
Horizontal/Vertical Position
and vertical placing of the image.
• Colour Temperature
normal or warm).
Audio selection
TV
To choose the sound reproduced on the TV
(
PC
Features
•
Phase/Clock
vertical (
•
Format
or the original (
•
Auto adjust
Reset to Factory
To return to the factory settings
YES
Mode
Æ
To come back to TV mode.
: to adjust the brightness and
: to adjust the colours (cool,
or ).
TV
: eliminates the horizontal (
) interfering lines.
Clock
: to choose between large screen (
Native ) format of the PC screens.
: position is set automatically.
key to return to
TV
: to adjust the horizontal
) and
Phase
Full screen
)