LANCOM 800 Installationsanleitung Seite 20

Downloaded from www.Manualslib.com
LANCOM Routers, WLAN Routers, Access Points and WLAN Controllers
Via a ISDN connection ¿.
³
Always switch on your device first before starting the PC for configu-

ration.
... with LANconfig
Start LANconfig. Unconfigured LANCOM devices will be found auto-
matically within the local network.
If LANconfig cannot find the device, check the network connection

and update the IP address of the configuration computer (e.g. via the
command line with ipconfig/renew, by reactivating the network con-
nection, or by restarting the computer). Then start the search in
LANconfig again.
It is possible, that LANconfig is not able to find the appropriate

devices in the LAN, if an „Internet connection Firewall" (Windows XP)
or any other „Personal Firewall" is activated on the configuration PC.
Deactivate, if necessary, the Firewall during the configuration, if the
unconfigured devices cannot be found.
Depending on the configuration, LANCOM wireless routers and

LANCOM access points in managed mode are
manuals search engine
· »
First steps
ISDN
¿
not displayed by the
4