First Steps - LANCOM 800 Installationsanleitung

LANCOM Routers, WLAN Routers, Access Points and WLAN Controllers
1
Downloaded from www.Manualslib.com

First steps

This short instruction gives answers to the following questions:
Which software has to be installed for the configuration?
How is the device attached?
How can the device be accessed via LANconfig, WEBconfig or via
serial interface?
How does one start the setup wizards (e.g. for setting up the Internet
access)?
How is a reset carried out?
Where can one find further information and support?
The complete documentation of your device contains the following parts:
This Quick Install Guide
installing network components and routers, and which are familiar with
the functioning of DHCP and DNS servers, as well as with TCP/IP addres-
sing.
The User's Manual
sary for setting up your device. In addition, all important technical speci-
fications can be found here.
The PBX Functions Manual
on commissioning a LANCOM VoIP router as a PBX (private branch
exchange) for a single location. Also described are the main operating
instructions for users, and how to connect terminal equipment.
The Reference Manual
deals with those topics, which apply accross several models to the
LANCOM operating system LCOS.
The Menu Reference Guide
parameters in LCOS, the operating system used by LANCOM devices. This
guide is an aid to users during the configuration of devices by means of
WEBconfig or the telnet console.
All documents for your product which are not shipped in printed form

are available as an Acrobat document (PDF file) from
www.lancom.eu/download
manuals search engine
First steps
is meant for readers, which have knowledge of
contains all detailed information, which are neces-
gives you detailed step-by-step instructions
complements the user's manual and particularly
comprehensively describes all of the
or on the product CD supplied.