Philips avent Handbuch Seite 4

Thank you for choosing Philips AVENT
GB
The Philips AVENT iQ Bottle and Baby Food Warmer is the only warmer with advanced iQ
Technology, designed to smartly and accurately adjust warming time based on contents and amount.
Whether warming milk or baby food that is frozen, chilled or at room temperature, the iQ Bottle and
Baby Food Warmer heats quickly, safely and evenly – with no hot spots. The versatile design holds all
AVENT Bottles, VIA Cups, and baby food jars or tins.
Please take 5 minutes to read through the ENTIRE INSTRUCTION LEAFLET including
the warnings before using your iQ Bottle and Baby Food Warmer for the first time.
PLEASE RETAIN THESE INSTRUCTIONS for future reference. Instructions are also
available at www.philips.com/AVENT.
Contents (A):
a. Lid
b. Lid Flap – Lifts to accommodate
larger bottles (330ml/11oz)
Interactive Electronic Display Guide
Milk Mode
(in ANY container)
Baby Food Mode
(in ANY container)
Freezer Temperature Mode
(Select when warming
from frozen)
Fridge Temperature Mode
(Select when warming
from chilled)
Room Temperature Mode
(Select when warming
from room temperature)
N.B. Whilst pressing the Power/Mode Selection or Volume Selection/Start Button, please hold the warmer base to prevent
the warmer from slipping.
Instructions for Use
1. Ensure that the warmer is placed on a firm level surface. Open the lid using the front catch, and fill
the warmer with the appropriate amount of water (i) – See page 2 to determine water amount.
Place the fully assembled bottle (including dome cap to prevent overheating) or storage container
with lid in the warmer. For food jars and tins, please refer to manufacturer's instructions.
N.B. When warming a 330ml/11oz bottle, the lid flap will lift to accommodate the larger size.
This will cause a small amount of steam to rise from the warmer.
Close the lid ensuring that the front catch 'clicks' shut.
2. Plug in the warmer and switch on at the mains.
3. Switch on the warmer by holding the Power/Mode Selection Button for 3 seconds (ii). The
warmer will beep, and the milk, room temperature and ml/oz symbols will illuminate. It is now
ready for use. If the lid has not been closed correctly, the symbols will flash. When the unit is
switched on, it automatically defaults to the milk/room temperature mode. If this is the mode
you need, go to step 5. If not, proceed to step 4.
4. Choose milk or food, and select the starting temperature (iii) by pressing the Power/Mode
Selection Button repeatedly until the desired symbols are illuminated.
Please note that there are 6 possible options: milk from room temperature, milk from chilled,
c. Warmer Base
d. Lifter
e. Interactive Electronic Display
310 11
285 10
255 9
230 8
200 7
170 6
140 5
115 4
85 3
55 2
30 1

Power/Mode Selection Button –
Hold button for 3 seconds to switch
the warmer on/off. Press repeatedly
to select milk or baby food and
starting temperature.
Volume Selection/Start Button –
Press repeatedly to select the volume
of milk or food. Once desired
selections are made, hold button for
3 seconds to start warming cycle.
Volume Display –
Displays the selected amount of liquid
or food in both ml and oz