Safety Instructions; Cutting With The Quickaction Switch; Cutting With The Continuous Operation Switch - Graef T 6 Bedienungsanleitung

Universal Slicer Tendenza T 6 / T 7 / T 9 / T 16

Safety instructions

cAUtION
Follow the safety instructions
below to prevent hazards and
property damage:
Do not touch the cutter
►
blade with your fingers. It is
very sharp and cause severe
injuries.
Sources of hazards
WARNING
The rotating blade can cut off
body parts. Your fingers, espe-
cially the thumbs, are endan-
gered. For this reason, never
reach into the space between
the stop plate and the holder
for the material to be sliced as
long as the stop plate is not
completely closed, i.e., is placed
below "0".
child-proof safety catch
You can push the carriage in front
of the blade and press in the car-
riage lock to secure the blade (the
stop plate must be closed, i.e. be
positioned under "0"). The car-
riage fits snugly.
cutting with the quick-
action switch
Place the items to be sliced on
‹
the carriage.
Set the desired slicing thick-
‹
ness.
Put the included tray, a plate or
‹
similar under the unit.
Press the items to be sliced
‹
slightly against the stop plate
and uniformly guide the car-
riage against the blade.
Press the quick-action switch.
‹
cutting with the continu-
ous operation switch
Use the continuous operation
switch to slice large quantities.
Put the included tray, a plate or
‹
similar under the unit.
Press the items to be sliced
‹
slightly against the stop plate
and uniformly guide the car-
riage against the blade.
Press the continuous operation
‹
switch.
Let the motor cool off after us-
‹
ing continuously for approx.
9.5 minutes.
important!
Soft items to be sliced (e.g.,
►
cheese or ham) can be sliced
best when cool.
Soft items can be sliced
►
better when you push them
slowly forward.
When slicing cucumbers or
►
carrots, it is advantageous
if they are cut to a uniform
length beforehand and then
fed in with the food holder.
© Gebr. Graef & Co. KG
EN
23