Wifi Connection Configuration - SATA STV-Serie Bedienungsanleitung

中文
EN DE RU KO PT JA ES
96473/96474

WIFI Connection Configuration:

The integrated WIFI module of the torque tester uses AP mode and produces an SSID named SATA- xxx, where xxx is the serial number of
the torque tester and the default connection password is 1234567890.
PC needs to integrate wireless network card, and make the following settings for the IP address of the network card: Wireless icon-
>network settings->Ethernet.
Right click on properties and select Internet 协议版本 4 （TCP/IPv4）.
45