Screen Display; Button Function; 96473 （2-50Nm） Button Operation - SATA STV-Serie Bedienungsanleitung

Screen display:

1） The screen shows that the unit of torque at Nm is Newton meters and can be switched to BFT （Ibf. ft pounds. feet）
2） Screen display + sign is positive torque, display - sign is reverse torque, and +-sign is displayed on 96473, but not on 96474. The
latter value is the real-time value of the test torque （tracking the torque, which can be transmitted to PC software by means of
communication）
3） The value behind the screen display S is the setted torque value （S: set torque can be changed by PC software or operation
keys）
4） The value behind the screen display P is the peak torque （P: peak torque can be transmitted to PC software by means of
communication）

Button function:

Key 1: Increase set torque, key 2: Reduce set torque, key 3: Torque unit switching, key 4: set torque increment switching.
96473 （2-50Nm） button operation:
A single press of key 1 can increase the setting torque （S） by 0.1Nm or 1Nm, and a continuous press of key 1 can automatically
increase the setting torque （S） by 0.1Nm or 1Nm increments, and the increment （0.1Nm or 1 Nm） can be switched by a single press
of key 4.
A single press of key 2 can reduce the setting torque （S） by 0.1Nm or 1 Nm, and a continuous press of key 2 can automatically reduce
the setting torque （S） by 0.1Nm or 1Nm. Reduction （0.1 Nm or 1 Nm） can be switched through a single press of key 4.
Torque Unit Cyclic Switching Through Key 3.
38
96473/96474
1 2
中文
3 4
EN DE RU KO PT JA ES