English
USER MAINTENANCE
Servicing involving the user is limited to periodi-
cally replacing the filters. The filters must only be
replaced when indicated on the controller display
(icon
).
The unit cannot be used without filters.
Always disconnect power before accessing
the unit.
• Open the front panel;
• Remove the caps (A);
• Extract the filters and replace them (B).
• Put all the components back in the opposite
order and reconnect power.
PLEASE NOTE: comply with the codes on the
filters and the type of unit connection used
(standard or right side).
B
A
• Now it is possible to switch off the icon
the display.
•
Go to the User Setting menu, press the "M"button.
•
Use the TOUCH PAD
.
activation
•
Press the confirm button
• The timer to change the filters has been reset .
94
Standard Con guration
F7
M5
Right Side Con guration
M5
F7
of
to select the icon of filter
.
In case the filters need to be changed before
the timer deadline, it is in any case possible to
reset the countdown "
following the just described procedure.
" at any moments by