Kaisai KVS-270 RHQ Bedienungsanleitung Seite 76

English
3. Connect the differential pressure gauge.
4. Turn on the appliance at the ON/OFF key on the
display.
5. Press the ON/OFF and "M" Menu keys at the same
time to access the TECHNICAL MENU.
76
6. Use the TOUCH PAD to select the installer menu
.
Press the Enter key to confirm
Select the "V" symbol and confirm
The message V1 flashes;
Perform the setting of the fan V1;
access the menu by pressing enter, the display shows:
V V
V V
Press the Enter key to confirm
Change the voltage value relative to the fan speed
using the TOUCH PAD
sure gauge displays a value equal to the value of the
objective pressure drop (Pascal) shown on the display.
V1 fan
speed voltage
80 = 8.0 Volt
V V
Objective
fan rpm
pressure drop
Press the Enter key to confirm
Before going on to set the fan V2, you must disconnect
the differential pressure gauge from connections P1
and P2 and put the rubber caps back in place.
.
.
set the nominal design
flow rate (m /h) using
3
the TOUCH PAD
.
+
until the differential pres-
_
=
.
+
.
_