10. Fluorescence observation procedures
Set the power supply switch to "I" (ON) and
wait for the arc to stabilize (5 or 10 minutes).
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
Adjust until you obtain a bright and even field of view
Insert the shutter when the microscope is
not used for a short time
Begin observation
(Used commands)
Fluorescence power supply
Slide holder
X/Y movement knobs
Fluorescence filter turret
Shutter
Revolving nosepiece
Coarse and fine focus knobs
Lamp housing focussing and centering
screws
Shutter
Page 23
(Chapter)
11
9
5
11
11
5
5
11
11