Technical Data - Claas BA-1383 Bedienungsanleitung

When measuring a bale with thick wrapping, puncture the wrapping with the probe tip before
measurement to make sure the force required for making a hole in the wrapping will not
affect density measurement.
Accuracy of the moisture measurement may be affected if a strong heating reaction ("sweat-
ing") is in progress, or if the bale has spoiled, or if the effect of preservatives has not yet fully
stabilised.
Keep the probe clean and dry. Any other electronic devices possibly connected to the bale
must be powered off during measurement.

11 Technical Data

Battery
Dimensions
Moisture measurement
range
Moisture measurement
2
accuracy
Reference method for
moisture determination
Moisture measurement
principle
Density compensation
Temperature compen-
sation
Operating temperature
range
Temperature measure-
ment range
Measurement memory
12 Warranty
This product has a warranty valid for one (1) year from the date of purchase. The warranty
covers the materials and workmanship. To claim the warranty, the customer should return
2
Instructions in chapter 10 must be followed to achieve full accuracy. Typical accuracy specified for
baled timothy/fescue mix without preservatives. Accuracy with other products may vary. As substantial
variation in measurement accuracy is possible, the manufacturer will not accept any claims for direct or
consequential damage due to incorrect display.
9 V alkaline battery, IEC type 6LR61 tai 6LF22
810 mm x 105 mm x 45 mm, probe length: 50 cm, weight (with
battery): 800 g
Hay and haylage: 8% ... 80%, Straw: 8% ... 25%, Hay Silage:
30% ... 84%, Corn Silage: 40% ... 76%, Alfalfa: 8% ... 75%
(percentage of water in weight at 15°C (59°F) temperature)
10% to 20%: 1.4%
20% to 30%: 2%
Oven dry method
EY N:o 152/2009, with samples acquired using a core sampler
drill from the depth of moisture measurement
Electronic impedance measurement
Automatic, based on push force and motion measurement
Semi-automatic, optional
Handle/display: -10°C ... +50°C (14°F ... 122°F),
Probe: -10°C ... +80°C (14°F ... 176°F)
-10°C ... +80°C (14°F ... 176°F)
64 bales, with total of 1000 moisture or temperature results
10
30% to 50%: 4%
50% to 70%: 6%
according to ISO 6496:1999,