Symbols On The Product - SMA Power Limiter I-BOX-40 Schnelleinstieg

3 Symbols on the Product

This section contains safety information that must be observed at all times when working.
The product has been designed and tested in accordance with international safety requirements. As
with all electrical or electronical devices, there are residual risks despite careful construction. To
prevent personal injury and property damage and to ensure long-term operation of the product,
read this section carefully and observe all safety information at all times.
Danger to life due to electric shock
If the product is installed improperly, dangerous voltages may be present on the control cables.
This can result in death or serious injury.
• Make sure that the product is correctly connected to the supply circuit.
Risk of injury due to sharp enclosure
A sharp enclosure can cause injuries during installation.
• Make sure not to touch the sharp edges of the enclosure during installation.
Damage to the product due to sand, dust and moisture ingress
Sand, dust and moisture penetration can damage the product and impair its functionality.
• The product must not be opened in case of splashing water (e.g. from an irrigation system).
• Only operate the product when it is closed.
• Only use the product in a dry indoor environment.
Damage to the product due to condensation
If the product is moved from a cold environment to a warm environment, condensation may form
in the product. This can damage the product or impair its functionality.
• When there are large temperature differences, wait until the product has reached room
temperature to connect the voltage supply.
• Make sure the product is dry.
3 Symbols on the Product
Symbol Explanation
WEEE designation
Do not dispose of the product together with the household waste but in accor-
dance with the disposal regulations for electronic waste applicable at the in-
stallation site.
6 Power Limiter-IS-xx-10
WARNING
CAUTION
NOTICE
NOTICE
SMA Solar Technology AG
Quick Reference Guide