Specifications - Makita DTM40 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. Check button
4-1. Slide switch
5-1. Dial

SPECIFICATIONS

Net weight
* NOTE: For continuous operation, high capacity battery cartridge BL1430, BL1440, BL1450, BL1830, BL1840, BL1840B, BL1850 and
BL1850B are recommended.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
Noise
The typical A-weighted noise level determined according
to EN60745:
Work mode: Sanding
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Model DTM40
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Downloaded from www.Manualslib.com
Explanation of general view
6-1. Front lamp
7-1. Indication lamp
8-1. Application tool installation bolt
8-2. Holes in the application tool
8-3. Protrusions of the tool flange
9-1. Application tool installation bolt
9-2. Hex wrench
9-3. Tighten
Model
Oscillation per minute
Oscillation angle, left/right
Overall length
Standard battery cartridge
without dust extraction attachment
with dust extraction attachment
Rated voltage
) : 78 dB (A)
pA
) : 82 dB (A)
pA
) : 93 dB (A)
WA
manuals search engine
DTM40
6,000 - 20,000 (min
1.6 ﾟ (3.2 ﾟ total)
BL1430 /
BL1415 * /
BL1440 /
BL1415N *
BL1450
1.9 kg 1.7 kg
2.0 kg 1.8 kg
D.C. 14.4 V
ENE080-1
Model DTM50
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Work mode: Cutting with segmental saw blade
ENG905-1
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Work mode: Scraping
Model DTM40
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DTM50
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
4
10-1. Application tool installation bolt
10-2. Holes in the application tool
10-3. Adapter (required for some
application tools)
10-4. Protrusions of the tool flange
11-1. Hex wrench
DTM50
-1
)
324 mm
BL1830 /
BL1815 * / BL1815N * /
BL1840 / BL1840B /
BL1820 * / BL1820B *
BL1850 / BL1850B
2.0 kg 1.8 kg
2.1 kg 1.9 kg
D.C. 18 V
) : 84 dB (A)
pA
) : 95 dB (A)
WA
) : 81 dB (A)
pA
) : 92 dB (A)
WA
) : 81 dB (A)
pA
) : 92 dB (A)
WA
) : 83 dB (A)
pA
) : 94 dB (A)
WA
Wear ear protection